|
it doesn't matter who makes the blower, a 10:71 comes in different offsets, some bias towards the front some rearward, Danny's happen to be offset forward giving sufficient distributor clearance, ya gotta know this before assuming a 10 will clear
|
FYI my Littlefield 10's wouldn't clear distributor as Danny's do just making that point
|
Sweet I got lucky for once. :D
|
Ya I talked with The Blower Shop today and they said their regular 10-71 will not clear a dizzy, but their front offset would. BDS uses a competition intake that moves the blower forward enough to clear the distributor. Littlefield didn’t want to take to much time to answer my questions but it sounds like their standard setup won’t clear either. TBS only sells a high helix 10-71 now and claims they take less power to turn and make more boost at lower rpm’s. BDS claims that there is no advantage to the high helix and will actually take more power to turn at my desired power levels. And they would not recommend the HH. So..... now I am confused??? |
|
There is a small diameter MSD that should clear.
|
A regular offset Blower shop 10-71 billet blower and MSD distributor will fit with the proper intake. RV went thru this.
I have two tall deck intakes that would work if your interested. |
kvogt, what brand intakes are they? |
Originally Posted by rob vanharten
(Post 4659136)
kvogt, what brand intakes are they? |
TBS 10-71 on BDS intake.
https://cimg6.ibsrv.net/gimg/www.off...fe3137ca3c.jpg |
| All times are GMT -5. The time now is 01:12 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.