Offshoreonly.com - 10-71 fitment??

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 10-71 fitment?? (https://www.offshoreonly.com/forums/general-q/357611-10-71-fitment.html)

rob vanharten

11-15-2018 01:10 PM

Wow!! That’s beautiful rv. Thanks you!!!

the deep

11-15-2018 05:52 PM

Quote:

Originally Posted by rv (Post 4659202)

TBS 10-71 on BDS intake.
https://cimg6.ibsrv.net/gimg/www.off...fe3137ca3c.jpg

rv where did you get those angled breather tubes . I have screw in Hardins that are straight and because of that no header clearance . Beautiful engine by the way . Sorry for the hi-jack .

kvogt

11-16-2018 07:47 AM

rv made the angled breather tubes.

rob vanharten

11-16-2018 09:02 AM

Quote:

Originally Posted by rv (Post 4659202)

TBS 10-71 on BDS intake.
https://cimg6.ibsrv.net/gimg/www.off...fe3137ca3c.jpg

rv, what was the cubic inch,boost, and hp numbers on this engine?

kvogt

11-16-2018 09:33 AM

600 inch. At the time the picture was taken he was running 10 psi boost with a low 7.7 to 1 compression. Horsepower unknown. The motors are now EFI and the compression for next year is going to be 8.6 to 1.

rv	11-17-2018 05:16 AM

Carbs, linkage, fuel log, regulator, hoses, flame arrestor and alternators for sale. Message me if interested, don’t want to derail thread.

Wobble

11-17-2018 08:29 AM

https://cimg1.ibsrv.net/gimg/www.off...ceba32a0f0.jpg
swartz racing

All times are GMT -5. The time now is 10:46 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page