10-71 fitment??
#14
Registered
Thread Starter
Join Date: May 2010
Location: Cedar Springs MI
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Ya I talked with The Blower Shop today and they said their regular 10-71 will not clear a dizzy, but their front offset would. BDS uses a competition intake that moves the blower forward enough to clear the distributor. Littlefield didn’t want to take to much time to answer my questions but it sounds like their standard setup won’t clear either. TBS only sells a high helix 10-71 now and claims they take less power to turn and make more boost at lower rpm’s. BDS claims that there is no advantage to the high helix and will actually take more power to turn at my desired power levels. And they would not recommend the HH. So..... now I am confused???
#17
Registered
A regular offset Blower shop 10-71 billet blower and MSD distributor will fit with the proper intake. RV went thru this.
I have two tall deck intakes that would work if your interested.
I have two tall deck intakes that would work if your interested.
#19
Registered