Using trs hydraulic steering on bravo drives
02-15-2019 | 05:54 AM
#1
Thread Starter
Registered
Joined: Sep 2018
Posts: 97
Likes: 7
From: Seymour tn
Using trs hydraulic steering on bravo drives
This is probably an ignorant question but here goes. I’m changing my trs drives over to bravo drives. Will my existing hydraulic steering work all the same with those drives. Thinking they are factory imco that came on my 12 meter
02-15-2019 | 06:58 AM
#2
Platinum Member
Joined: May 2012
Posts: 11,433
Likes: 3,958
From: Midwest & T-Rock
No worries, as long as the throw on the rams work with the wing plate on the drives, in other words if the rams site in the same position with the drives neutral ( straight forward ) you'll be fine.
02-15-2019 | 07:10 AM
#3
Thread Starter
Registered
Joined: Sep 2018
Posts: 97
Likes: 7
From: Seymour tn
