1996 26 Scarab 454mag issues and experiences.
05-21-2019 | 03:57 PM
#12
Thread Starter
Registered
Joined: Feb 2019
Posts: 30
Likes: 1
From: Michigan
05-21-2019 | 08:21 PM
#13
Registered
Joined: Jan 2013
Posts: 32
Likes: 0
It’s not any easier but did the long block have a warranty? Did they specify a break in procedure?
I’m about to embark on the same journey as you. I have a new project with a similar but slightly older engine, supposed to be in good condition.
Jason
I’m about to embark on the same journey as you. I have a new project with a similar but slightly older engine, supposed to be in good condition.
Jason
05-22-2019 | 08:22 AM
#16
Thread Starter
Registered
Joined: Feb 2019
Posts: 30
Likes: 1
From: Michigan
Yes it was warrantied for one year, but I'm pretty close to that expiring. Thing is I already took it back to them once and they failed to fix it. If you want to know the place I used shoot me a PM so that you can avoid them.
05-22-2019 | 08:24 AM
#18
Thread Starter
Registered
Joined: Feb 2019
Posts: 30
Likes: 1
From: Michigan
05-28-2019 | 01:20 PM
#20
Platinum Member
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
There is supposed to be a PCV valve in the odd bank's valve cover. The vacuum line from the PCV valve goes to a fitting on the intake (connects underneath). If you only have breathers installed, then that's surely a contributor.
Can you get us some pictures of what you have?
Can you get us some pictures of what you have?
