CMI headers and Sealant
08-01-2019 | 07:41 AM
#11
Platinum Member
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
x2
I make sure the flanges are nice and clean. So far so good. Using a sealant makes them a mother to get cleaned.
Also, loosen up your clamps/break the hoses free at the tips so that it's easier to adjust the alignment of the surfaces. the v-clamp will align the pipe and the gasket for you.
I make sure the flanges are nice and clean. So far so good. Using a sealant makes them a mother to get cleaned.
Also, loosen up your clamps/break the hoses free at the tips so that it's easier to adjust the alignment of the surfaces. the v-clamp will align the pipe and the gasket for you.
Last edited by TomZ; 08-01-2019 at 07:44 AM.
