454 Mag MPI gen v rebuild help
#21
Registered

Joined: Apr 2006
Posts: 10,041
Likes: 712
From: Toledo Oh
I can guarantee you that if you don't slow down, figure out what's wrong and take the appropriate steps to correct, and deal with somebody that knows what he is doing, you WILL be back this spring posting " I spent $xxx dollars on a new motor ,it does t run right, my boat goes slower and my engine builder ripped me off "
#22
Registered

Joined: Oct 2012
Posts: 2,239
Likes: 541
I can guarantee you that if you don't slow down, figure out what's wrong and take the appropriate steps to correct, and deal with somebody that knows what he is doing, you WILL be back this spring posting " I spent $xxx dollars on a new motor ,it does t run right, my boat goes slower and my engine builder ripped me off "
Honestly slow down. I mean this in a bad way but you are all over the place. Im not sure you have a knock in your engine at this point. If I remember one of your recent posts it did not knock when you had it out checking fuel pressure. If that is the case a bearing knock will be constant.
I would take your oil filter off and cut it open to see what is inside at this point.
#23
Registered

Joined: May 2009
Posts: 630
Likes: 408
From: Indiana
That's what I said back when he changed oil, don't know if it happened. My heads spinning on this one too. Cableguy....you got all winter man take your time like they said and just do it once. Tyler Crocket is a good dude,very smart, and will answer the phone and talk to you. The advantage with his package is it is known and tested, and he already has a tune for the ECM. He can reprogram it for you, he can also service your fuel injectors which you should do if it's apart.



