Offshoreonly.com - 1075 to custom power

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 1075 to custom power (https://www.offshoreonly.com/forums/general-q/363544-1075-custom-power.html)

Quote:

Originally Posted by 302Sport (Post 4712249)

https://cimg9.ibsrv.net/gimg/www.off...9f056db93.jpeg
Ok since we seem to have a couple people on this thread who know what they’re talking about, I will ask here. I am going to convert from my old (circa 2008) Smartcraft screen to a new Simrad Go9. What am I going to need parts wise to make this happen and what am I getting into wiring wise?

I did the conversion and it's pretty straight forward. Take a look and get a visual of what you want to do in your boat. Are you connecting a NMEA2000 stereo, remotes, displays for passengers in the future? Laying out the NMEA 2000 network backbone so you can add in the future is a good tip to get started. I went from the helm around the cockpit to the co-pilot dash with a break in the engine compartment. That way I can just "T" into the backbone quickly and effortlessly. https://cimg6.ibsrv.net/gimg/www.off...c0fbd0dc32.jpg
https://cimg7.ibsrv.net/gimg/www.off...9f584988f4.jpg
https://cimg8.ibsrv.net/gimg/www.off...af2d61b736.jpg
https://cimg5.ibsrv.net/gimg/www.off...aea800904f.jpg
https://cimg6.ibsrv.net/gimg/www.off...3ee227b55a.jpg
https://cimg3.ibsrv.net/gimg/www.off...9d4672f60.jpeg
https://cimg4.ibsrv.net/gimg/www.off...99cf74d497.jpg

Seems pretty straight forward. I think the only thing that wont read through this setup is the Livorsi fuel gauge/sender. I’m going to look into what it will take to make that work.

Quote:

Originally Posted by 302Sport (Post 4712398)

Seems pretty straight forward. I think the only thing that wont read through this setup is the Livorsi fuel gauge/sender. I’m going to look into what it will take to make that work.

maretron tla100 adapter will put the tank level on the nmea network. I have the gateway to program the description in the coding.

So I need to power the backbone and the Simrad unit?

Also the two connectors that went into the SC5000 display (square shape) don’t fit any of the connectors on the new vessel view link kit I got???

Back to the OP. This seems like what you want or need

https://www.michiganmotorz.com/mercr...UaAsRUEALw_wcB

Quote:

Originally Posted by 302Sport (Post 4714895)

So I need to power the backbone and the Simrad unit?

do you have the harness labeled as C in post 11

Quote:

Originally Posted by sutphen 30 (Post 4714922)

do you have the harness labeled as C in post 11

No it didnt come in the kit. Looks like i need to buy that??