Go Back  Offshoreonly.com > Technical > General Q & A
Blackhawk drive shower >

Blackhawk drive shower

Notices

Blackhawk drive shower

Thread Tools
 
Old 11-10-2019, 07:43 PM
  #1  
Registered
Thread Starter
 
Join Date: Sep 2016
Location: Waterford, Michigan
Posts: 179
Received 12 Likes on 8 Posts
Default Blackhawk drive shower

I have not been able to locate a capable Blackhawk drive cooler. Suggestions? Maybe I have to pull fluid into the transom and a water/oil cooler?
sandslot is offline  
Old 11-11-2019, 07:22 PM
  #2  
Registered
 
Join Date: Aug 2014
Posts: 934
Received 190 Likes on 105 Posts
Default

Simrek had some older showers that were for different steering systems. I believe marine marine was one that needed a special shower. The pick up ends were removable but then reattached through a sleeve that held the end and the main body of the shower together with set screws (I hope that makes some sense). If you found one of these I would think you could take it and bend and cut it to make it fit.

I will look, I may have a picture from one of my boats that had one like that.
tmmii is offline  
Old 11-12-2019, 09:27 AM
  #3  
BUP
Banned
iTrader: (9)
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,594
Likes: 0
Received 41 Likes on 35 Posts
Default

You can install a water pick up on the transom and direct that water flow to the exact spots hitting the BHawk upper
BUP is offline  
Old 11-12-2019, 07:44 PM
  #4  
Registered
iTrader: (4)
 
Join Date: Oct 2002
Location: Bowling Green, Kentucky
Posts: 1,975
Received 40 Likes on 22 Posts
Default

SkiDoc is offline  
Old 11-12-2019, 07:45 PM
  #5  
Registered
iTrader: (4)
 
Join Date: Oct 2002
Location: Bowling Green, Kentucky
Posts: 1,975
Received 40 Likes on 22 Posts
Default

I upgraded to Max marine top cap and shower
SkiDoc is offline  
Old 11-17-2019, 12:20 PM
  #6  
Registered
 
Join Date: Jun 2016
Location: Woodstock, Georgia
Posts: 85
Received 2 Likes on 2 Posts
Default

Originally Posted by sandslot
I have not been able to locate a capable Blackhawk drive cooler. Suggestions? Maybe I have to pull fluid into the transom and a water/oil cooler?
Craig Skilling , used a bravo 1 and bent it slightly.Look at the Donzi Marine Restoration on FB to see hie set up
Donzi Z22 is offline  
Old 11-17-2019, 12:33 PM
  #7  
Registered
Thread Starter
 
Join Date: Sep 2016
Location: Waterford, Michigan
Posts: 179
Received 12 Likes on 8 Posts
Default

Originally Posted by Donzi Z22
Craig Skilling , used a bravo 1 and bent it slightly.Look at the Donzi Marine Restoration on FB to see hie set up
thank you!
sandslot is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.