|
Originally Posted by ThisIsLivin
(Post 4781954)
https://cimg0.ibsrv.net/gimg/www.off...21600ff947.jpg
I also make sure my boat insurance is paid on time. I found the guy that makes them for AFR, Dart, Howards etc. He literally had heads from all of them to check the fit. I have AFR heads and the Hardin valve covers as well, no problems. Interesting. From my phone I’m unable to see the name on the girdles however they look like a nice piece. Does this guy just make them upon request and sell or is it under a company name. Tks |
The set I have are actually labeled Howards Cams. I also use their phenolic carb spacers, I added the tapered 4 hole and it made such an improvement my wife noticed. I also added a 1" open and noticed even more gain. The owner was actually an old time off shore racer himself. They're based in Pontiac, MI, website is: https://jomarperformance.com/
|
Originally Posted by ThisIsLivin
(Post 4781970)
The set I have are actually labeled Howards Cams. I also use their phenolic carb spacers, I added the tapered 4 hole and it made such an improvement my wife noticed. I also added a 1" open and noticed even more gain. The owner was actually an old time off shore racer himself. They're based in Pontiac, MI, website is: https://jomarperformance.com/
abones passed on their number a bit ago and I called and talked to John. Real neat guy. Gave me cash pick up price. I love it. I must admit I like the design of the Webster’s better. Is there a cross ref to to a jomar 1114. |
Originally Posted by getrdunn
(Post 4781982)
abones passed on their number a bit ago and I called and talked to John. Real neat guy. Gave me cash pick up price. I love it.
I must admit I like the design of the Webster’s better. Is there a cross ref to to a jomar 1114. I am sure he can tell you exactly what you need. 916 635-4233 I’d be careful around Abones, gotta keep an eye that guy 🧐😎 |
Originally Posted by payuppsucker
(Post 4782033)
Bill (Webster) is very knowledgeable and has always answered any questions.
I am sure he can tell you exactly what you need. 916 635-4233 I’d be careful around Abones, gotta keep an eye that guy 🧐😎 |
Originally Posted by payuppsucker
(Post 4782033)
bill (webster) is very knowledgeable and has always answered any questions.
I am sure he can tell you exactly what you need. 916 635-4233 i’d be careful around abones, gotta keep an eye that guy 🧐😎 👀😂 |
Originally Posted by getrdunn
(Post 4782150)
👀😂
I am sure he can tell you exactly what you need. 916 635-4233 I’d be careful around Abones, gotta keep an eye that guy 🧐😎 WHAAAAAT? REEEELLY? :party-smiley-004: :blahblah: |
T
T&D rockers and you have both
|
Originally Posted by Islandhopper2
(Post 4782837)
T&D rockers and you have both
|
i know older post,,,but i am with ya getrdunn,,,as i am also running 720 isky cam,,,,tried of worrying about rocker coming lose,,,and yes have the alien lock set up..
what about JOMAR,,,they were THE stud girdle set up years ago,,ran them on my super gas car.. |
| All times are GMT -5. The time now is 06:16 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.