Interesting. From my phone I’m unable to see the name on the girdles however they look like a nice piece. Does this guy just make them upon request and sell or is it under a company name. Tks

The set I have are actually labeled Howards Cams. I also use their phenolic carb spacers, I added the tapered 4 hole and it made such an improvement my wife noticed. I also added a 1" open and noticed even more gain. The owner was actually an old time off shore racer himself. They're based in Pontiac, MI, website is: https://jomarperformance.com/

abones passed on their number a bit ago and I called and talked to John. Real neat guy. Gave me cash pick up price. I love it.


I must admit I like the design of the Webster’s better. Is there a cross ref to to a jomar 1114.

Bill (Webster) is very knowledgeable and has always answered any questions.
I am sure he can tell you exactly what you need. 916 635-4233

I’d be careful around Abones, gotta keep an eye that guy 🧐😎

I worked with Bill on the 525 Mercury Edelbrock alum head, I sent him one head and he designed the brackets off of it, very good guy to deal with

👀😂

Bill (Webster) is very knowledgeable and has always answered any questions.
I am sure he can tell you exactly what you need. 916 635-4233

I’d be careful around Abones, gotta keep an eye that guy 🧐😎


WHAAAAAT? REEEELLY?

T&D rockers and you have both

I would have to agree but over priced IMO. Very good with very little failures and means a lot to help protect a 20k engine for sure. Definitely worth it but the yella terras have a great track record just not as well known. I want to do a swap on dyno playing with my intake lift to see if it’s worthy of any respectable gains before pulling the trigger on any shaft mount rockers.

i know older post,,,but i am with ya getrdunn,,,as i am also running 720 isky cam,,,,tried of worrying about rocker coming lose,,,and yes have the alien lock set up..


what about JOMAR,,,they were THE stud girdle set up years ago,,ran them on my super gas car..