What software are you tuning them with?

Holley EFI, I believe Dan is still using V5.

How did you get your IAT up to 162 on the hose?

The sensor is in the intake runner , I think it reverts some exhaust at idle .
The other engine it`s in the back of the intake and the temps at idle read much lower .

Once I get on plane and there`s water thru the chiller , that temps drops like a rock.
Good eye thou lol

Man, that's some really cool hardware. How much boost are you targeting?

Like others said almost idles too smooth! Is there another tensioner that goes on or is the one pulley the only tensioner? I’m not super familiar with the bigger wooples

It’s the special software that stabilizes the ninja canootin lobes. “Smart lobes”. 😆

Around 8 psi

Cog belt you only need one tensioner.

gaining 1000 rpm?

so are the woooples gonna get that thou ?

I had those props worked over by FJ end of season to get more RPM out of them. Haven`t tried them yet .
If they work as good as they look and combined with the Woofles , maybe?
It would be nice cause those props carried the boat absolutely perfect .