502 MPI Intake and Injector Question
#11
The intake is not. It is pre- 99, but someone prior to me modified it to fit the 99 injectors (smaller than the older ones that usually go into it).
seems that I need a new intake that will fit the injectors that are there (small in size). Per schematic it is 861300A2.
issue is I can’t find any and I have a new intake, but it is pre 99 and fit the bigger injectors only.
The following users liked this post:
articfriends (05-22-2022)
#14
How can I fit a 861260T Injector into my 805233C manifold. The 805233 Manifold takes a bigger injector (805225)
Attached is photo of the 2 injectors. The small is what I have on my motor now (861260T), the big one (805225) is what fits into the manifold I have.
Attached is photo of the 2 injectors. The small is what I have on my motor now (861260T), the big one (805225) is what fits into the manifold I have.
#15
Platinum Member
Platinum Member
iTrader: (2)
I have a ‘98 intake as well as a better than factory set of injectors. The intake isn’t in the best of shape but it did seal well using the factory Merc gaskets. Send me a PM if interested.
#17
Platinum Member
Platinum Member
iTrader: (6)
What ecm do you have ? how was the intake modified for the smaller injector
The following users liked this post:
articfriends (05-22-2022)
#18
the studs of the intake was shaved down and injectors jellied into the hole. It worked for a season.
but now I am putting a new block into the boat and was going to change the intake to a new clean one and my mechanic saw this. Now I can’t find a intake that fits the smaller injectors.
#20
I really don’t want to deal with flashing and keep the current injectors that are with the motor. But I can’t find a intake to fit them
not sure if there is a adaptor or something to make it work?
looks like these injectors fit to a intake number 861300A2