500efi - injector tick
#1
Thread Starter
Registered

Joined: Jun 2010
Posts: 4,839
Likes: 930
Fairly certain it’s common…just wanted to get feedback from fellow 500 efi owners. Or anyone else who has been in a bilge with the 500efi running.
aside from the swoosh sound from intake. I can hear all the injectors ticking as it runs. Normal?
aside from the swoosh sound from intake. I can hear all the injectors ticking as it runs. Normal?
#2
Nope - never heard any noticeable ticking but honestly did not put my ear close to them! If they are the original injectors(?) you may want to have them tested as they have been known to fail with age and potentially cause engine problems. There are some threads from ~4 years ago on the 500 EFI injector topic.
#3
Thread Starter
Registered

Joined: Jun 2010
Posts: 4,839
Likes: 930
I didn’t record sound…will next time I’m near the boat. Sounds similar to this. I read the threads you are talking about. Problem is there are no known direct replacements. And chances are if we do clean and test them they will fail. So not sure what to do
#5
Yes, it is normal for them to tick. It's a solenoid opening and closing.
You can send them here to be cleaned and checked out:
https://www.boatunlimited.com/marine...ting-cleaning/
It's a wise investment. On my race car, I even send brand new injectors to my flow testing buddy before they go into the car. He has found bad NEW injectors.
You can send them here to be cleaned and checked out:
https://www.boatunlimited.com/marine...ting-cleaning/
It's a wise investment. On my race car, I even send brand new injectors to my flow testing buddy before they go into the car. He has found bad NEW injectors.
#6
Registered

Joined: Sep 2020
Posts: 55
Likes: 40
From: Rhode Island
I heard this and said what the hell....... then i realized this is the exact noise i get from my Corvette...... was positive i had a bad valve spring, never considered "injector tick"
#7
Thread Starter
Registered

Joined: Jun 2010
Posts: 4,839
Likes: 930
Yes, it is normal for them to tick. It's a solenoid opening and closing.
You can send them here to be cleaned and checked out:
https://www.boatunlimited.com/marine...ting-cleaning/
It's a wise investment. On my race car, I even send brand new injectors to my flow testing buddy before they go into the car. He has found bad NEW injectors.
You can send them here to be cleaned and checked out:
https://www.boatunlimited.com/marine...ting-cleaning/
It's a wise investment. On my race car, I even send brand new injectors to my flow testing buddy before they go into the car. He has found bad NEW injectors.
#8
So just send them out and have them cleaned and rebuilt. Chances are the components are replaceable. Most are very similar. BUP aka John at the link I mentioned is a straight shooter. He'll tell you your options.
#9
Thread Starter
Registered

Joined: Jun 2010
Posts: 4,839
Likes: 930
I know he is banned. So I’ll keep people posted. For anyone interested.
#10
Registered

Joined: Jun 2007
Posts: 7,337
Likes: 1,838
From: Merritt Island, FL
EDIT:
Just read the comment above,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, that sucks.




