Fuel Pressures while running - 502 Mag MPI
#22
Thread Starter
Registered


Joined: Aug 2007
Posts: 1,422
Likes: 1,062
From: Orlando, FL
#24
Registered

Joined: Nov 2004
Posts: 14,140
Likes: 3,706
From: On A Dirt Floor
#25
Thread Starter
Registered


Joined: Aug 2007
Posts: 1,422
Likes: 1,062
From: Orlando, FL
Nevertheless, I guess I could try a set of 24s and see what happens.
#26
Thread Starter
Registered


Joined: Aug 2007
Posts: 1,422
Likes: 1,062
From: Orlando, FL
I've wondered if the drives were swapped to 1.36s, I plan to check that this week by rotating a motor by hand and counting prop revolutions.
#27
Thread Starter
Registered


Joined: Aug 2007
Posts: 1,422
Likes: 1,062
From: Orlando, FL
Confirmed drive ratio is 1.5 , so it seems like both motors are down on power if they can't turn a 26 past 4500 rpm?
I'll try to find a pair of 24s to try, but in the meantime, my Diacom arrived so I'll try to get some data logging done soon.
I'll try to find a pair of 24s to try, but in the meantime, my Diacom arrived so I'll try to get some data logging done soon.
#29
Thread Starter
Registered


Joined: Aug 2007
Posts: 1,422
Likes: 1,062
From: Orlando, FL
I spoke today with a previous owner of the boat, he had it for a few years (prob 2018-2020 or so), said it never ran more than what I'm describing. So it appears it's not a new issue.





i’m a little slow. Sorry.