Adding trim switches to throttle or helm
#31
Platinum Member
Platinum Member
Thread Starter
iTrader: (2)
I get needing extra parts. Just ranting about what I got for the money… A five dollar switch and a decal.
I’ll grab a pic later. It’s (not so) amusingly ridiculous.
I’ll grab a pic later. It’s (not so) amusingly ridiculous.
The following users liked this post:
Twin O/B Sonic (02-10-2023)
#32
Registered
Here’s mine.
I have $20 in it.
Started set up for a single and I modded it for what I needed.
The electrical tape is holding the harness on the back side of that lever as it wouldn’t fit through the tube that the single harness went through.
I have $20 in it.
Started set up for a single and I modded it for what I needed.
The electrical tape is holding the harness on the back side of that lever as it wouldn’t fit through the tube that the single harness went through.
The following users liked this post:
TomZ (02-10-2023)
#33
Registered
iTrader: (1)
Damn !
The following users liked this post:
SB (02-11-2023)
#37
Registered
Sorry if this is late, but I have one of these I don’t need. I installed trim sync last season and this got replaced with two switches on the throttle.
#39
Registered
$20 and I’ll pay the shipping.