Sending unit questions
#21
Registered
iTrader: (1)
Hex heads i use the head of a hex bolt just use 2 nuts on its threads to lockem so you can turn the bolt.
If allens, and the strip, alot of times a torx bit will takem out.
If allens, and the strip, alot of times a torx bit will takem out.
The following 3 users liked this post by SB:
#22
Platinum Member
Platinum Member
iTrader: (6)
you can tap a 12 point socket on a hex head and break it loose, had to do it on stock Merc head bolt
#23
Registered
Thread Starter