Best MI Motor rebuilder . . .
12-21-2002 | 10:50 AM
#11
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
How Deep are your pockets? Sterling!!!!!!Wesco Industries (Dave Wesseldyke) or if your a tight ass like me do them yourself!!!
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
12-21-2002 | 07:44 PM
#12
Gone Fishin'
Joined: Nov 2000
Posts: 7,408
Likes: 0
From: Grand Rapids/Holland/Grand Haven
Hey dyno....how about Double D/Team Chaos?? They/We do pretty good work.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
12-22-2002 | 08:03 AM
#16
VIP Member
Joined: Jan 2002
Posts: 2,998
Likes: 112
I second Bruce Wolfie
Bruce Wolfie of:
Wolfie's Compition Engines is Awesome.
He built engines for several of my friends.
Stands be hind his work.
Del Sol is on the board here and he
bought a set of Wolfies engines from
a friend of mine. Still running
Strong in a big 40' Scarab.
Wolfie is in Baroda Michigan, not
sure I spelled that right. Anyways
right by St. Joe.
Good Luck
Cougarman
Wolfie's Compition Engines is Awesome.
He built engines for several of my friends.
Stands be hind his work.
Del Sol is on the board here and he
bought a set of Wolfies engines from
a friend of mine. Still running
Strong in a big 40' Scarab.
Wolfie is in Baroda Michigan, not
sure I spelled that right. Anyways
right by St. Joe.
Good Luck
Cougarman
12-22-2002 | 10:40 AM
#17
Registered
Joined: Dec 2000
Posts: 513
Likes: 0
From: Beautiful Lake St. Clair,MI
"Baker, Crockett, Katech, Sterling", Wow, thats some heavy hitters. All are established top notch builders. My son worked about 2 years at Sterling, and has been with Katech about 4-5 years now. If you go to either Sterling or Katech, you better have deep pockets.
Jomar, has also been around a long time and has alot of experience in performance marine. Millennyum, might be your best bet. I know he has done considerable work for 26Scarab, and he seems to be very consciencencious. He is close, next to Beacon Cove, plus he is a boater himself! I don't think Sparky at Viscious does engines anymore, but he is so entrenched in the loop around here he may be a good one to get a referral from.
Good luck
Jomar, has also been around a long time and has alot of experience in performance marine. Millennyum, might be your best bet. I know he has done considerable work for 26Scarab, and he seems to be very consciencencious. He is close, next to Beacon Cove, plus he is a boater himself! I don't think Sparky at Viscious does engines anymore, but he is so entrenched in the loop around here he may be a good one to get a referral from.
Good luck
12-22-2002 | 06:01 PM
#18
Registered
Joined: Apr 2002
Posts: 8
Likes: 0
From: Detroit, MI
A couple of friends of mine had engine work done at Shipwreck Marine and were pleased with the work. Not close to you, though. They are in Detroit, near Jefferson.
Last edited by BOBBYGONZO; 12-22-2002 at 06:05 PM.
12-26-2002 | 01:04 AM
#20
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
I believe there are several shops in Michigan that do a good job.
Bruce Wolff (Wolffie) got his start with John Lingenfelter and eventually became one of his right hand men. Wolff builds & tunes a lot of offshore stuff for guys in Indiana & Chicago areas. His shop is located in S.W Michigan: (269) 422-1090
Bruce Wolff (Wolffie) got his start with John Lingenfelter and eventually became one of his right hand men. Wolff builds & tunes a lot of offshore stuff for guys in Indiana & Chicago areas. His shop is located in S.W Michigan: (269) 422-1090
