38 top gun and big power
05-14-2003 | 06:23 AM
#21
Platinum Member
Joined: Dec 2002
Posts: 15,270
Likes: 21
From: Burlington, VT
Originally posted by SummerObsession
If you use #6's, be sure to use "plug-in" sixes that do not require an extension box with drive shafts. The sixes that use the boxes get the weight of the drive too far aft. The cure for this is either to move the motors forward (6-12" depending on who you talk to) or convert to plug ins....
If you use #6's, be sure to use "plug-in" sixes that do not require an extension box with drive shafts. The sixes that use the boxes get the weight of the drive too far aft. The cure for this is either to move the motors forward (6-12" depending on who you talk to) or convert to plug ins....
05-14-2003 | 08:42 PM
#22
Guest
Posts: n/a
Call Offshore Performance in Grasonville Md 410-827-0200 and talk to them about their 38 Top Gun "The Spider Boat" with 1200's and 6's.
They also have a new 46 Rough Rider with 700 CID 1200's and 6's.
The 38 runs over 120 If I recall correctly. Call and talk to them. The boat belongs to the Owner of Offshore. Also Harry @ Offshore has a 42 Tiger with 900's, but I think he is running 3's. He has steps.....
They also have a new 46 Rough Rider with 700 CID 1200's and 6's.
The 38 runs over 120 If I recall correctly. Call and talk to them. The boat belongs to the Owner of Offshore. Also Harry @ Offshore has a 42 Tiger with 900's, but I think he is running 3's. He has steps.....
05-15-2003 | 05:47 PM
#23
Registered
Joined: Jun 2001
Posts: 103
Likes: 1
From: Grand Rapids, MI
Sounds like an awesome boat Cigar! How about some pictures?
I am currently rerigging my 1999 Top Gun (cover girl) with dry sump 6's and Chief 950's, so I am definitely interested in your project.
I originally talked to DMan and he definitely helped me out on a few things like x dimension...etc...
What are you running for props and what kind of speeds are you seeing?
Take care and congrats!
Curtis
I am currently rerigging my 1999 Top Gun (cover girl) with dry sump 6's and Chief 950's, so I am definitely interested in your project.
I originally talked to DMan and he definitely helped me out on a few things like x dimension...etc...
What are you running for props and what kind of speeds are you seeing?
Take care and congrats!
Curtis
