Need help finding oil filter bracket..
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
Need help finding oil filter bracket..
I am looking for this bracket. Cp performance and teague marine make them but they are for Big block chevys. I need one of these setups for a small block chevy. It mounts on the rear of the cylinder head.
Does anyone make one?
Travis
Does anyone make one?
Travis
#2
The filter unit looks like a Fram remote mount kit with a special bracket.
Contact some speed shops like www.summitracing.com who specialize in small blocks.
Frankly buy kit (about $40) and just get a piece of aluminum a make my own. Save yourself some $$
Contact some speed shops like www.summitracing.com who specialize in small blocks.
Frankly buy kit (about $40) and just get a piece of aluminum a make my own. Save yourself some $$
#3
Registered
Join Date: Sep 2001
Location: Lake St. Clair
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Why not just get a dual (or single) remote kit ?
I bought 2 from summit, or jegs, and then just mounted it to the back of the engine compartment (where the hatch comes down there is a ledge on my boat) ? It makes oil changes real easy because the filter are mounted "right side up" ?
Just a thought...........
I bought 2 from summit, or jegs, and then just mounted it to the back of the engine compartment (where the hatch comes down there is a ledge on my boat) ? It makes oil changes real easy because the filter are mounted "right side up" ?
Just a thought...........
Thread
Thread Starter
Forum
Replies
Last Post
JGB
General Q & A
21
02-08-2011 11:24 AM
Anarchy Powerboats
General Boating Discussion
5
03-15-2007 03:24 PM