Bravo I Gears
02-05-2003 | 05:27 AM
#1
Thread Starter
Registered
Joined: Sep 2002
Posts: 2,093
Likes: 165
From: King george, Virginia/Potomac River
Bravo I Gears
I am thinking about changing the gear set in my bravo drive from 1.36 to a 1.5 ratio. How hard is this? I've been inside Alpha's and a #1 before, but never a Bravo.
Also, where is the best place to get the gears, and should I go with Merc gears or is aftermarket ok?
Also, where is the best place to get the gears, and should I go with Merc gears or is aftermarket ok?
02-05-2003 | 09:52 AM
#3
Registered
Joined: Jan 2003
Posts: 17
Likes: 1
From: San Dimas, Ca
Depending on your torque range, and wieght of boat you may want to consider upgrading to the XR gears.
You can call Chris @ the above thread, or give us a call!
IMCO 800-899-8058 www.imcomarine.com
You can call Chris @ the above thread, or give us a call!
IMCO 800-899-8058 www.imcomarine.com
