Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Merlin Intake Manifold Question (https://www.offshoreonly.com/forums/general-q/43630-merlin-intake-manifold-question.html)

Panther 02-18-2003 06:04 PM

Merlin Intake Manifold Question
 
Does anyone know for a fact, that Merlin makes the BBC Single Plane Marine Intake for an Oval Port?

I was at the AC boat show and the guy at one of the booth's was trying to tell me that Merlin only makes the Marinized manifold as a Rectangular Port.


If Merlin does make the Marine Single Plane Oval Port Intake, can someone please give me the part number, and price?

Thanks,

Panther

sheikman 02-18-2003 07:21 PM

merlin manifold
 
Panther,

Merlin only makes a square port manifold. This can be used on oval ports. The design is one that will cover the oval port design.

Sheikman

Ratchet 02-18-2003 09:29 PM

Re: merlin manifold
 

Originally posted by sheikman
Panther,

Merlin only makes a square port manifold. This can be used on oval ports. The design is one that will cover the oval port design.

Sheikman

Panther,

PM 26 scarab, I think he has one of these that was actually reworked to match the oval port heads on his engine...........maybe he can let you know where / who he got it from.

KCHOTBOAT 02-20-2003 12:55 AM

If I remember correct 26scarab has a high hp motor so are you sure you are not talking about porting a intake to the heads?

dyno 02-20-2003 06:45 AM

I bought a Merlin oval port single plane intake from Summit a few years back it was $300 but is not "Marinized" but I run fresh water I sold it to JimV....

dyno 02-20-2003 06:47 AM

on second thought it was a Dart! its still availible for $349

Ratchet 02-20-2003 06:47 AM


Originally posted by KCHOTBOAT
If I remember correct 26scarab has a high hp motor so are you sure you are not talking about porting a intake to the heads?
He does have one, but for some reason I thought this is what he did........I'll ask him when I see him.

RJ

26scarab 02-20-2003 10:18 AM

I've got a Brodix intake that was welded up and ported to match my oval ports.
I'm not too sure on the part number for the intake I think it is
200-1. Brodix used to make an oval port version but I think they discontinued it.

Tom McCann 02-22-2003 02:19 PM

Merlin makes a oval port intake. Its not a marine intake but it can be used. I have used street intakes for years and never had a problem. You will get a lot of neg feed back with this but you know what, when its on the motor they can't tell the differance. I can't speak for salt water use, but for fresh water I would not waste the money for the marine intake. Check out Summit they have them there.

mtm 02-23-2003 07:24 AM

intake
 
whats up Frank try looking into geting new intakes hard coat anodizes just like they do the exuast systems like imco /keith eickert and others. and it will last a lot longer .


All times are GMT -5. The time now is 01:59 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.