Notices

Naca vents?

Thread Tools
 
Old 03-28-2003 | 05:59 AM
  #1  
dyno's Avatar
Thread Starter
Charter Member #655
 
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Default Naca vents?

Has anyone ever found Nascar style Naca vents that will replace the old rectangle vents that most of us have? I remember a thread a long time ago that someone was going to make some.....did it ever happen?
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Reply
Old 03-28-2003 | 06:16 AM
  #2  
Audiofn's Avatar
Charter Member #232
20 Year Member
Charter Member
Super Moderators
 
Joined: Oct 2000
Posts: 18,417
Likes: 6
From: Carlisle, MA USA
Default

I think I started that thread a while back. Man that was like a LONG time ago. I never did wind up doing anything yet. There were a few suggestions as to were you can get them.

Jon
__________________
Put your best foot forward!
Audiofn is offline  
Reply
Old 03-28-2003 | 07:12 AM
  #3  
Raypanic's Avatar
Charter Member
 
Joined: Oct 2000
Posts: 1,560
Likes: 0
From: Lake Orion, MI. USA
Default

http://www.racerpartswholesale.com/naca.htm

http://www.butlerbuilt.net/page23.html

here is a couple of links
__________________
Ray
Raypanic is offline  
Reply
Old 03-28-2003 | 07:45 AM
  #4  
mcollinstn's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Sep 2001
Posts: 5,769
Likes: 150
From: tn
Default

Somebody on the board had some NACA ducts glassed into the hull sides to feed the motor. Can't remember who, but when I see his name, I'll come back and post it.
mcollinstn is offline  
Reply
Old 03-28-2003 | 08:30 AM
  #5  
Scott's Avatar
Charter Member #30
20 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 2,164
Likes: 18
From: Bellville,Oh
Default

I think I found it!
http://www.offshoreonly.com/forums/s...ght=Naca+vents

Do a search on Naca vents and you will find a few topics. I had to do it after seeing Ray's links I could not picture how they would look on a boat. NICE on the above link.
__________________
I have Steps & Bubbles!
Scott is offline  
Reply
Old 03-28-2003 | 09:19 AM
  #6  
dyno's Avatar
Thread Starter
Charter Member #655
 
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Default

I was hoping that someone made one that would fit over the existing holes that are in our boats tthat way we wouldn't have to glass anything in.....
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Reply
Old 03-28-2003 | 10:07 AM
  #7  
Cignificant's Avatar
Charter Member
 
Joined: Oct 2000
Posts: 1,679
Likes: 1
From: Richmond, VA
Default

There's a guy here in Richmond that was making them, and then he didn't get any interest so he dropped the project. I just spoke to him on the phone - his name is Steve - and he's willing to start back up again if anyone is interested. You can email him at [email protected]

Here's one he made, but he also can make the rectangle kind.
Attached Thumbnails Naca vents?-scoop2.jpg  
__________________
Steve Gresham
'03 Donzi 33ZX
Cignificant is offline  
Reply
Old 03-28-2003 | 12:22 PM
  #8  
JS232's Avatar
Registered
 
Joined: Mar 2003
Posts: 1,044
Likes: 1
From: Montreal,Quebec
Default

How does those vents affect the engine' performance? And waht is it exactly?
JS232 is offline  
Reply
Old 03-28-2003 | 12:51 PM
  #9  
CigDaze's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Jun 2001
Posts: 21,346
Likes: 10
Default

Originally posted by JS232
How does those vents affect the engine' performance? And waht is it exactly?
NACA is an acronym for the "National Advisory Counsul of Aeronautics" and was the predecessor to today's NASA...

They, of course were involved in all aspects of Aeronautical Science and Aviation and developed one of the largest databases on Fluid Dynamics and flight mechanics.

The inlets, diffusers and ducts you see today on many race cars, boats, and aircraft are decendants of those developed during the pioneering days of aviation and space travel.

Of course, through marketing, costing, and pure ineptness in design, most of the ducts you buy today off the shelf at these "Ricer Go-fast" shops have little in common with the real thing.

Hell, most of them when alalyzed or tested perform rather poorly and don't deserve to be associated with the term NACA...

Choose wisely.
CigDaze is offline  
Reply
Old 03-28-2003 | 01:18 PM
  #10  
Niuhi's Avatar
Charter Member #971
 
Joined: Feb 2001
Posts: 418
Likes: 0
From: Shoreline, WA, US
Default

those are exactly what I have been looking for, but wasn't sure what they were called. Now add them to these ram air boxes and you have some nice cool air for the motor, not that stale air.

http://www.ramairbox.com/
__________________
Les

Hawaii no ka 'oi
Niuhi is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.