morse cables on bravo shift bracket???
05-15-2003 | 01:37 AM
#1
Thread Starter
speel chekk this fokker!
Joined: Feb 2001
Posts: 5,329
Likes: 1
From: Locust Valley, New York
morse cables on bravo shift bracket???
where can i get the cable ends for morse cables that will work on the bravo shift plate? I also need some kind of reatined thign. The 33c cables have the notch in them that you ususlaly just clamp over (liek eth thing on eth bottom of gaffrig throtlles) but what do i use on eth shift bracket?
also what cable ends should i use for the carb? I was just goign to use the same ones that are on the throttle end and bolt them to the dominator.
also what cable ends should i use for the carb? I was just goign to use the same ones that are on the throttle end and bolt them to the dominator.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
05-15-2003 | 06:14 AM
#2
Official OSO boat whore
Joined: Oct 2000
Posts: 6,157
Likes: 0
From: Mequon, WI
CP performance carries a plastic end that will work. I don't know where to get the brass ones. They may be a merc item.
