Dave,
I might be able to help I will make a call in the morning. Remember I said might:D

thanks scott . . let me know (cell# 419-461-1484). was thinking about getting this wraped up by the LEOPA poker run. dont know if im giong to get a batboat or run mine so i wanna be ready just in case. later. :cool: :cool:

To clarify my statement,
once the l/h rotation lower is installed,
the shift cable will have to be switched
at the quadrant, so the shifters match
direction.

L/h alpha lowers , the rear gear is the
forward gear, which is the reverse
gear in r/h alpha's, thus requiring
different cable action.

jt

thanks jt . . .

Answer your phone:D

And TTT for anyone else that can help My friend did not have counter rotating drives in stock.

I have a 86 alpha one L/H rotation Ill trade for a R/H rotation

Paul

Call me @ 512-848-1951 Ive got one to trade.

glassdave,
I switched alpha's to c/r. PM me if you like

I have just bought a set of Alpha drives. One is supposed to be a CR unit but is not marked. With the shift tab in the straight position, they both turn in the same direction. I may have gotten screwed. Jt mentioned that the cables must be switched. If so I might have one CR unit. Should I split the upper and lower and start there?

thanks for all the info guys.

sutphil - i will contact you. i would definetly like to discuss this with someone that has been through it.

scott- i'll get ahold of you or see ya at the poker run. :cool:

BahaRunner- you weasel :p :p :rolleyes: :D . . start yer own damn thread . . . :D