old 4.3 to new 350mpi swap
09-18-2003, 10:12 AM
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Cumming, GA.
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
old 4.3 to new 350mpi swap
i have an 88 4.3 v6 i was planning on swaping out for a new 350 mpi mag the question i have is will the big round wire harness plug be the same between the two so i can just plug it in or will i have to rewire the boat.
09-18-2003, 10:48 AM
#3
Registered
Thread Starter
Join Date: Sep 2001
Location: Cumming, GA.
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
it stock with an edelbrock intake and 4bbl carb runs real strong not sure when i will have the cash for the upgrade but i will let you know when i am ready
09-18-2003, 11:35 AM
#6
Registered
Thread Starter
Join Date: Sep 2001
Location: Cumming, GA.
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
no i dont have the motor yet im in the planning stages can you say cashflow. Thanks for the info Dennis I know it should be pretty easy swap accept for my motor mounts. im going to have to fabricate some brackets them.
09-18-2003, 03:02 PM
#8
Registered
I have a 350 MagMPI that I am going to sell in the next few months (It is Time.. Big Block) Complete with all accessories ;alt, ps pump, wpump, sea wpump, manifolds w/ risers, Flywheel ect. Drop in and hook up wires, fuel lines and hoses and go!!!! 2000 motor with 275 hrs. I have not thought of a selling price yet. If you're interested, keep me in mind.
09-18-2003, 03:21 PM
#9
Registered
Thread Starter
Join Date: Sep 2001
Location: Cumming, GA.
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
i will let you guys know i probably wont do anything till January shah mat let me know what price you are thinking i can get a brand new one from a friend thats a dealer for just under 6k with all the accesssories.
Thread
Thread Starter
Forum
Replies
Last Post
NormRinker
General Boating Discussion
6
07-31-2007 10:55 AM
