at speeds you are running actually a polished prop will run slower thana satin finished prop.as the satin finish creates friction and helps hold the BITE.:D

Another Question for Houston
 

I have a 19 Mirage that i banged up pretty good last summer, I hit bottom and bent over all 3 blades. Is this worth repairing or should i spend the 400+ on a new prop. One more question I am running it on a 26 foot Searay with a single 454 330, top speed is about 45 on average. Any tips on getting a little more out of her, should i go for a 4 blade. Any suggetions would be great or a qoute on a repair. I attatched a pic of the prop.
Thank you for you time.
Jason

Banged up Mirage
 

Jason,Hey Thanks for asking ,can we repair your prop?

No problem,Thanks for the picture I will put a pic on here and show you what we can make your prop look like after beging repaired by Houston Prop:D

and If you can call me and we cantalk more in detail about any changes we may need to make ,Thanks again, Darin

FLIP J 5
 

THANKYOU!!!!!!!!!!!!!!!!!!!

FOR PLACING YOUR ORDER AND WHEN THE PROP COMES IN,

I WILL CALL YOU TO MAKE SURE WE ARE ON THE RIGHT TRACK,
I have everything entered on the computers ,so we should be ok ,Thanks again Darin

Did you get my prop? I sent it out a couple of weeks ago.

J

Jason
 

Fulton? yes it came in on 2/06/04 we apoligize for not calling,we are buried in props around here,it's a good thing .

looking at about a week in half,it has been started with several ,Thanks Jason.

if you need it QUICKER for any reason call me at 281-580-7767:)

Thanks Darin

I just looked above at the picture of your prop,its looking alot better.:D

Great can not wait to get it back and try it out. Of course i have to wait for the ice to melt. :D :D :D :D

ICE
 

ITS SUPPOSED TO BE IN THE UPPER 70'S HERE TODAY!:D :eek:

Darin,

Thanks for doing such a great job on the prop! I will post after my test run with it, to let you know how it runs with your mods.

Thanks again for a job well done!
Jason



:D :D :D