Go Back  Offshoreonly.com > Technical > General Q & A
Big cubic inch question.... >

Big cubic inch question....

Notices

Big cubic inch question....

Thread Tools
 
Old 12-03-2003, 12:15 PM
  #21  
Registered
 
later's Avatar
 
Join Date: Oct 2000
Location: Chesterfield Mo/Loto
Posts: 1,378
Likes: 0
Received 11 Likes on 2 Posts
Default

SinkorSwim you are correct.

later

i ead that you had your boat at cpr at the lake ive heard it is off D rd tried to find it the other weekend but did not see a sign. is it the brown buildings that sit up a gravel rd with a small house?
later is offline  
Old 12-03-2003, 01:26 PM
  #22  
Registered
Thread Starter
 
Join Date: Jun 2002
Location: Missouri
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Post There is no sign

Its about 3 or 4 miles on D and then on the right you will see Ballard Rd... crappy old ozark gravel road,,, but it will lead you to the mecca of HP at the LOTO...

Once you find Ballard road its less then a !/4 mile.. Can't miss the 2 HUGE buildings with fence....

Last time I was there; there was a real nice 40 or 46 Skater that you would look real nice in...
SinkorSwim is offline  
Old 12-03-2003, 02:02 PM
  #23  
Registered
 
Crazyhorse's Avatar
 
Join Date: Jan 2001
Location: Holland MI
Posts: 3,140
Likes: 0
Received 0 Likes on 0 Posts
Default

Sink or swim, the nice thing about big-block Chevy engines is that you can make a good amount of horsepower for a reasonable amount of money. The members here on OSO have tried just about every conceivable combination and are willing to share that information, as well as letting you know how well it worked.
Crazyhorse is offline  
Old 12-03-2003, 03:02 PM
  #24  
Registered
 
Zoomnfun's Avatar
 
Join Date: Nov 2000
Location: Saint Charles, IL USA
Posts: 89
Likes: 0
Received 1 Like on 1 Post
Default

6 611's, still thinking about that deal from the am
Zoomnfun is offline  
Old 12-03-2003, 07:17 PM
  #25  
Registered
 
tripps's Avatar
 
Join Date: Mar 2001
Location: babylon,NY 11702-4116
Posts: 1,963
Received 24 Likes on 15 Posts
Default

I have a 4.600 bore with a 4.500 stroke which = 598,2 inches less than 600 Tripps
tripps is offline  
Old 12-03-2003, 09:28 PM
  #26  
Registered
 
jdnca1's Avatar
 
Join Date: Feb 2002
Location: KY
Posts: 1,099
Likes: 0
Received 0 Likes on 0 Posts
Default

I run a 4.75" callies with 4.60" bore Merlin 2 tall deck. 900HP @6500, 820 ft/# @5100 on pump gas with Dart 360 Heads and 2X775 Race Demons. Build this motor for Pontiac heads and find another 125hp+ on pump gas. Oh yeah, Dominators and more Rpms would be sick power...but not exactly a pleasure boat motor at that point.

Actually, this is a pretty small motor. A buddy of mine runs IHRA pro stock, 815" motor but very exotic. 10K for the block, 20K for heads, split Dominators, a lot more, 1600+HP on fuel.

Just remember there is no substitute for cubes....
jdnca1 is offline  
Old 12-03-2003, 09:35 PM
  #27  
Registered
 
later's Avatar
 
Join Date: Oct 2000
Location: Chesterfield Mo/Loto
Posts: 1,378
Likes: 0
Received 11 Likes on 2 Posts
Default Re: There is no sign

Originally posted by SinkorSwim

Last time I was there; there was a real nice 40 or 46 Skater that you would look real nice in...
i heard that they were putting some motors in the wild horses 40 skater

later

ps
thanks for the info i thought that was there shop on ballard rd.
later is offline  
Old 12-11-2003, 11:17 AM
  #28  
Registered
 
Back4More's Avatar
 
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by Zoomnfun
6 611's, still thinking about that deal from the am
Thats you .... always thinkin about makin it faster.
Its in you blood...you need this to survive...you will have to do it...you will make the decision soon...you can take control now.
Back4More is offline  
Old 12-11-2003, 11:38 AM
  #29  
Registered
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Default Re: There is no sign

Originally posted by SinkorSwim
Its about 3 or 4 miles on D and then on the right you will see Ballard Rd... crappy old ozark gravel road,,, but it will lead you to the mecca of HP at the LOTO...

Once you find Ballard road its less then a !/4 mile.. Can't miss the 2 HUGE buildings with fence....

Last time I was there; there was a real nice 40 or 46 Skater that you would look real nice in...

it is the little shack in the back, where all the magic happens........ you must provide ID to the guard at the gate and perform a retina-scan before you entering their compound. you are thoroughly searched before exiting, to ensure you are not leaving with any secrets!

if you manage to get in, check out Jean's "Slow Down Ed" button on Wild Horses!!! LOL!!!

jbk
jawbreakerkid is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fast Shafts
General Q & A
8
07-21-2008 06:56 AM
bcfountain
Fountain
9
08-14-2007 02:17 PM
Strip Poker 388
General Boating Discussion
31
02-11-2007 09:25 PM
GPM
General Q & A
19
02-12-2005 08:08 PM
Ratchet
General Boating Discussion
19
11-16-2002 04:20 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Quick Reply: Big cubic inch question....


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.