Cable Covers for rigging a new Merc OB
#1
Registered
Thread Starter
Join Date: Jan 2004
Location: South Carolina
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Cable Covers for rigging a new Merc OB
I've seen the pictures in magazines, but I've never found a source or manufacturer for the cable covers for rigging an outboard. I'll be rigging a new 250 EFI on a 22' Velocity and I'd like to use the cable covers that look like vacuum cleaner hose. There's an adapter on the motor well and an adapter on the motor housing and a hose connecting the two. It's very clean looking and I'd like to use it, but I don't know who makes it?
Can anybody point me in the right direction?
Can anybody point me in the right direction?
#4
Registered
Join Date: Sep 2001
Location: Cumming, GA.
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
Thread Starter
Join Date: Jan 2004
Location: South Carolina
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
AZ Dominator - I couldn't open the picture. Any chance you could email it to me @ [email protected]? Thanks.
MikeV - It looks like no one can get in touch with the braided lines? Any other idea? I wouldn't mind pricing them as well.
MikeV - It looks like no one can get in touch with the braided lines? Any other idea? I wouldn't mind pricing them as well.
#7
Offshoreonly Advertiser
Offshoreonly Advertiser
Mercury sells it. According to my book the engine side should come with the engine from 2000 up. The kit itself is PN 825191A4 which inludes the hose and boat fitting. I agree it is a nice clean look. The braided on is kind of neat too.e
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired