Need Trim Tab Parts?
03-05-2004 | 04:16 PM
#1
Thread Starter
Charter Member #300
Joined: Oct 2000
Posts: 740
Likes: 0
From: Palm Harbor, FL
Need Trim Tab Parts?
http://trimtabs.tripod.com
Hi,
I finally tracked down the guys who make the non-merc trim tbs for the older fountains and all the cigarettes. The guys at Livorsi sent me to them. He was real helpful and can get me the "here and there" parts I needed for the tabs I bought here.
He never heard of OSO and I explained that there are plenty of boat nuts like me who do most of there own wrenching and would like another source for harder to find parts...
May he might become an advertiser....
Thanx to Park Enterprises again...
Hi,
I finally tracked down the guys who make the non-merc trim tbs for the older fountains and all the cigarettes. The guys at Livorsi sent me to them. He was real helpful and can get me the "here and there" parts I needed for the tabs I bought here.
He never heard of OSO and I explained that there are plenty of boat nuts like me who do most of there own wrenching and would like another source for harder to find parts...
May he might become an advertiser....
Thanx to Park Enterprises again...
07-24-2006 | 08:11 PM
#2
Registered
Joined: Aug 2005
Posts: 225
Likes: 0
From: Sandusky, OH
Re: Need Trim Tab Parts?
It appears that Park Enterprises is no longer in business. I have been trying to hunt down a replacment cylinder for my 03' Velocity. They reopend as Performance Hydraulics. www.performancehydraulics.net 843-234-9500. Out of Myrtle Beach, SC. They are still using the same cylinder and offer the black powder coat for $299 and polished for $399. Hope this helps some people out.
