Fiberglass Air Scoop
 

I AM GOING TO INSTALL A SUPERCHILLER ON MY 525SC AND THE ENGINE IS GOING TO BE TALLER THAN THE ENGINE HATCH. DOES ANYONE KNOW WHERE I CAN PURCHASE A FIBERGLASS AIR SCOOP THAT CAN BE INSTALLED ON TOP OF THE ENGINE HATCH??

THANKS VERY MUCH; LOOKS LIKE A GOOD PLACE TO START LOOKING.

Just don't let people step on them.

I put so much fiberglass in mine I can sit on it. I could have bought a couple for what I spent on resin and fiberglass.

Eddie Marine has some in there catalog then I imagine their web site

They run around $250 to $300 at a local speed shops. Local boat paint guy wanted around $900.00 to re enforce and paint.

I bought mine from Summit Racing for around 200.00 rivited it down and glass it up from underneth and left the top alone because the sun pad covers around it.

Bought a Harwood Scoop from Summit also. ;-)

these scoops were bought from summit for 170 dollars each.( Harwoods) I went to the parts store got some fiberglass mat with some resin. Reinforced the under sides of each.
Painted them to match the boat.

Approx cost entire project. $400.00

Do it your self and save.
Gerry