MERCATHODE System Components Location
 

I'm installing new(er) transom assembly's due to severe corrosion damage. I am going to install MERCATHODE system on each drive unit.

Where do the compoenets mount on transom assembly? Doe one of mercathode parts replace the square zink on bottom of assembly next to trim cylinder hose block?

How are wires routed thru assembly and transom?

Poorsche

Re: MERCATHODE System Components Location
 

Wow! I'll be watching for help with this, especially if it's the type that mounts to the trim hose connector manifold at the bottom of the transom yoke. Some pieces are hanging loose on one, and the other side looks like a two-piece "plastic-electric-rubber" concoction that's probably a cathodic system of some sort. Mercruiser manuals do not seem to touch on this much, so it's a little sketchy for me. But hey, at least I ttt.

Bob

Re: MERCATHODE System Components Location
 

Lets see if these pictures come up!!!! :cool: [IMG]

Re: MERCATHODE System Components Location
 

One more

Re: MERCATHODE System Components Location
 

another

Re: MERCATHODE System Components Location
 

just three more

Re: MERCATHODE System Components Location
 

and another

Re: MERCATHODE System Components Location
 

bored yet

Re: MERCATHODE System Components Location
 

Now if some nice sole will post a w/diagram you'll be all set

Re: MERCATHODE System Components Location
 

Hope these help. I just took it off my boat to install new t/a. One more part for the shelf. :rolleyes: