MERCATHODE System Components Location
06-06-2004 | 05:27 AM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 1,243
Likes: 0
From: Melbourne, FL
MERCATHODE System Components Location
I'm installing new(er) transom assembly's due to severe corrosion damage. I am going to install MERCATHODE system on each drive unit.
Where do the compoenets mount on transom assembly? Doe one of mercathode parts replace the square zink on bottom of assembly next to trim cylinder hose block?
How are wires routed thru assembly and transom?
Poorsche
Where do the compoenets mount on transom assembly? Doe one of mercathode parts replace the square zink on bottom of assembly next to trim cylinder hose block?
How are wires routed thru assembly and transom?
Poorsche
06-14-2004 | 07:19 PM
#2
Registered
Joined: Oct 2003
Posts: 78
Likes: 0
Re: MERCATHODE System Components Location
Wow! I'll be watching for help with this, especially if it's the type that mounts to the trim hose connector manifold at the bottom of the transom yoke. Some pieces are hanging loose on one, and the other side looks like a two-piece "plastic-electric-rubber" concoction that's probably a cathodic system of some sort. Mercruiser manuals do not seem to touch on this much, so it's a little sketchy for me. But hey, at least I ttt.
Bob
Bob
[IMG]
