Livorsi Tach Problem
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Lake St. Clair
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
Livorsi Tach Problem
I have twin 502 MPI & recently put two new Livorsi tachs. They read almost identical up to 4000 rpm after that the port tach flutters & bounces between 4000 - 4500 & the SB reads fine . Engines seem to run fine no miss what-so-ever. I swapped the two tachs the other day to see if I had a bad tach but same problem. any ideas?? bad ground ? I checked seems fine any ideas?? thanks,
#2
Gold Member
Gold Member
Re: Livorsi Tach Problem
Originally Posted by Ran-Dom 32
I have twin 502 MPI & recently put two new Livorsi tachs. They read almost identical up to 4000 rpm after that the port tach flutters & bounces between 4000 - 4500 & the SB reads fine . Engines seem to run fine no miss what-so-ever. I swapped the two tachs the other day to see if I had a bad tach but same problem. any ideas?? bad ground ? I checked seems fine any ideas?? thanks,