How is your Coil bracket mounted?
#1
VIP Member
VIP Member
Thread Starter
How is your Coil bracket mounted?
I'm looking for ideas on how to improve the way that my coil bracket is mounted. My coil(s) are mounted with the standard U shaped bracket by one bolt to the back of the head. I noticed yesterday that the bracket has cracked and broken right at the mounting hole. Vibration?
I was thinking that I could make something that I could get mounted in a better way...any suggestions??
I was thinking that I could make something that I could get mounted in a better way...any suggestions??
#2
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Re: How is your Coil bracket mounted?
Dig through summit or Jegs and buy a aftermarket one. If they are only mounted with one bolt, then you know why it broke. I too have mine mounted off the back of the head, but I fabricated a aluminum plate that is mounted with 3 bolts. The bracket is then bolted to the plate.
Last edited by Cord; 06-22-2004 at 12:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lman
Fiberglass and Paint
4
03-26-2007 10:58 PM