I'm sure you could get some made up for a big $$, custom fabrication. It looks a little funky though with that sharp angle in the riser pipe, seems like they could have done a better design than that. Maybe a straighter pipe with a piece of rubber exhaust hose to absorb some of the vibration. Are your tips at the waterline on your boat?

This is what i have..

kammaman

Pipes are way out of the water at least 8". The existing tips as you can see don't have flanges on them for a hose set up. Redrilling, glass work, are needed for new tips. Not a huge deal but one to tackle in the winter.

I like your set up that is what should be on this thing. My 3.5" pipes don't cut it



Thanks Josh

Here's there website....www.hardin-marine.com

There mite be something their that will work..or contact them. You can get 3.5" exhaust hose to fit over your ss pipe!



Jim

Thanks Jim

I have e-mailed them a picture and they are working on it