mercury mech trim indicators
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: mass
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
mercury mech trim indicators
i've just installed new trim indicators they work great. except when the drives are in the panel indicates 9 which is suppose to out when trimed out it moves to a lower # what did i do wrong the cabels can only be mounted from the bottom due to the restriction on the dash!
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: mercury mech trim indicators
The #6 panel is opposite the rest, you will need a new lens. If it is a bottom entry panel, 9 should be at the bottom for all drives except a 6. At least this is true if using the conventional style actuators.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: mercury mech trim indicators
Hi Paul, 844932 is white, 849516 is grey
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
skygod
General Boating Discussion
7
07-18-2017 07:15 AM