Offshoreonly.com - converting a bravo to #6???

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - converting a bravo to #6??? (https://www.offshoreonly.com/forums/general-q/89358-converting-bravo-6-a.html)

dlbCheckmate

11-01-2004 09:08 PM

Re: converting a bravo to #6???

Quote:

Originally Posted by Sydwayz

Why not just dump the Bravos and go to Konrad Drives?

Two reasons, one the added length with the trannys, and two I don't think Konrads are good for 1000hp :eek:

mopower

11-01-2004 09:16 PM

Re: converting a bravo to #6???

Quote:

Originally Posted by dlbCheckmate

Two reasons, one the added length with the trannys, and two I don't think Konrads are good for 1000hp :eek:

Thought you can get trans in a standoff style box so no additional room is required inside :confused:

monsta

11-07-2004 05:03 PM

Re: converting a bravo to #6???

imco's 4x4 are rated pretty high on the power, and have the tranny's in the box. and are faster, hydrodynamicly, in the water than a 5 or 6 because of surface area. plus with all the 5 & 6 blade prop's around today you probably wont run out of prop.

All times are GMT -5. The time now is 07:58 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page