Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Blower on 600 merlin??? (https://www.offshoreonly.com/forums/general-q/96490-blower-600-merlin.html)

STRAIGHTPRIORITY 02-14-2005 09:15 AM

Blower on 600 merlin???
 
I have a 600ci merlin with 8:1 comp. producing low 700hp range. Should i go threw the hassle of raising compression or go with a blower, and if so what blower?... p.s its in a 29 fountain f1 and runs 90.. :evilb: :evilb:

44MTI 02-14-2005 09:18 AM

Re: Blower on 600 merlin???
 
If you add a 14-71 with about 6#s of boost you should be just over 900 hp. I did this same combo a couple of yrs ago.

STRAIGHTPRIORITY 02-14-2005 09:24 AM

Re: Blower on 600 merlin???
 
Thats the answer I was hoping for. I have never owned a blower motor b4, so i am a little hesitant.... just on the reliable side.

44MTI 02-14-2005 09:31 AM

Re: Blower on 600 merlin???
 
It really shouldn't be a reliablity issue as long as your not on the ragged edge and use good parts. I have had many blower motors with very little problems that weren't self inflicted. Plus nothing looks as bad as a big ol blower on top.
I actually mad over 1000hp with this combo with no intercooler but dialed it back to like 950 .Pump gas, no innercooler, but was a solid roller. It can be hard on bravos if you don't baby it.They make alot of TQ. That being said I would still bo with the blowers.

STRAIGHTPRIORITY 02-14-2005 09:40 AM

Re: Blower on 600 merlin???
 
Thanks for the info.... Thats the power range i wanted to be in on pump, Im not concerned with the parts issue... but i like to run motors fairly hard, that was what i was worried about. but i think im gonna go with a blower anyway, i just wanted a little reassurance and to hear someone else that had that combo. thats my other concern is my drive, its a xz but my boat is very light and i cant afford a #6 :D

STRAIGHTPRIORITY 02-14-2005 09:42 AM

Re: Blower on 600 merlin???
 
Either option is simular in most aspects even cost.....??

44MTI 02-14-2005 09:54 AM

Re: Blower on 600 merlin???
 
I ran a couple of 1050 dominators which worked well. My engine shop preffered them over the 1200 because of idle characteristics

Fountaineer 02-14-2005 11:38 AM

Re: Blower on 600 merlin???
 
I also have a 29 Fountain that runs 90. I'm curious why you want to go faster than that. The hull is a handful at 80, and exciting at 90, I can't imagine going much faster with this boat.

magnum27 02-14-2005 11:59 AM

Re: Blower on 600 merlin???
 

Originally Posted by Fountaineer
I also have a 29 Fountain that runs 90. I'm curious why you want to go faster than that. The hull is a handful at 80, and exciting at 90, I can't imagine going much faster with this boat.

I would have never thought that.

wannabe 02-14-2005 12:56 PM

Re: Blower on 600 merlin???
 

Originally Posted by Fountaineer
I also have a 29 Fountain that runs 90. I'm curious why you want to go faster than that. The hull is a handful at 80, and exciting at 90, I can't imagine going much faster with this boat.


All that Torque on a 29 single would be very interesting. The single V's that run over a 100 mph are very special to handle that speed. I am not sure the 29 Fountain was ever designed for that.

Wannabe


All times are GMT -5. The time now is 06:23 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.