I don't know much about Kaama drives soooo, Drives were on 30' Formula, Props are Keikhaefer 6" hub w/ 19 splines.Are these the same props as used on #3 ssm and small shaft 3A and #4? Hate to buy another set of props if taper and dia. wrong. Thanks for the help!

NM--
Kaama props are 19spline(small shaft) they are the same as ssm #3, 3a's are different. Kamma's are also 6" hubs on most of them. I own a Kaama
35' Formula and run ssm#6 (large shaft) props with an adapter kit. I am looking for a set of small(or large) 17" x 26p props. There were many Kamma boats that came with the 16.5 x 26 props.

Hope this helps.

The Kaama is the same shaft as the small (Long shaft 6 inch) #3 or #4. Are you running 3 or 4 blade props? When I had Kaama's on a 30 Sutphen I generally ran 4 blade, they planned better and were a little smoother. Three blades had a little better top end.

I have a Kaama manual I can email if you are interested.

mike

Mine came with the 16.5x26 four blades, also a 30 foot Formula.

Thanks guys I bought the props!

I make the adapter kit that allows you to put a SSM#6 propeller onto a 19 tooth spline shaft.

Early SSM#3, KAAMA, and Arneson ASD6 drives all use the same propeller.

3A and above have the 26 tooth shaft.

They Look like this!

Rik Thanks For the Bushings!
Job well Done
Gonna see if I can bring the 32,s up to 5800 rpm.
Maybe ill break my record.

Now if I can make it through this year without
Running over a floating log.