Need Advice - Used Engines
#21
'05 Concept SF23
VIP Member
Re: Need Advice - Used Engines
In my past experience you will get more $ from your used engines by parting them out. Have the blowers resealed and sell as fresh. Pressure test the headers and pipes. Send the transmissions to Huber and have them freshened up. The freshened up and tested parts should bring 40%-50% of new. The rest is used parts. Heads cranks, rods should bring 25%-35% of new. Don't waste $ working on them as most folks will want to do that themselves @ their engine builder. You might get $500 for the one good block. Toss the cams, lifters, pistons, & bad block. Good luck. Joe Murray
#23
Registered
Join Date: Nov 2003
Location: Stockholm, Svea Rike
Posts: 1,277
Likes: 0
Received 4 Likes
on
4 Posts
Re: Need Advice - Used Engines
The Patterson headers have less than 50 hours on them. they have been sitting in a warehouse for the last 14 years. They would be really nice on a single carb engine set-up.
Carl, any pics of the P-son headers?
Mange
[email protected]
Carl, any pics of the P-son headers?
Mange
[email protected]
#24
Registered
Thread Starter
Join Date: Jan 2002
Location: Michigan
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Advice - Used Engines
Originally Posted by Mange
The Patterson headers have less than 50 hours on them. they have been sitting in a warehouse for the last 14 years. They would be really nice on a single carb engine set-up.
Carl, any pics of the P-son headers?
Mange
[email protected]
Carl, any pics of the P-son headers?
Mange
[email protected]
#25
Registered
Re: Need Advice - Used Engines
Carl I gave my buddy a voice mail about your parts, he is gone on vac. right now but will be back home here soon. I know some of your parts a a prefect fit for a project he is going to do so hopefully you guy can help each other out. Let me know what you want for the motors? Take care, Steve.
#27
Registered User
Join Date: Mar 2005
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Advice - Used Engines
If you still have those motors I would like to make an offer on them. You can e mail me at [email protected] with info on how to contact you.
Thanks,
Tom
Thanks,
Tom
#28
Registered
Join Date: Nov 2000
Location: LOTO
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Advice - Used Engines
Drop me a email also at [email protected] you can call at 573-808-0598 Intersted in eng and related parts. Thanks Dennis
#29
Registered
Re: Need Advice - Used Engines
Carl I called 2 freinds today about your parts, they will get a hold of you, if the parts will work for there projects. Take care, Steve.
#30
Registered
iTrader: (1)
Re: Need Advice - Used Engines
Hey Carl---I remember those old Patterson headers with the Y-pipes sticking out the transom of your Apache----yes, I remember them very well. Unfortunately, once you got that Apache, seeing the back end of your boat was something we, and everyone else had to get accustomed to---not much of a choice....especially from Booky's boat! Had a lot of fun.
Thread
Thread Starter
Forum
Replies
Last Post
LubeJobs42
General Boating Discussion
17
02-29-2008 10:38 AM