heads for 383 sbc's?
#12
Platinum Member
Platinum Member
Thread Starter
Re: heads for 383 sbc's?
I ran 19' 4 blades last summer and absolutely thrashed it! Every hole shot was to the dash! The engines were stock and tired so I was fortunate enough not to break anything. So I appreciate the input because I would have put four blades back on after the re-builds.
#14
Platinum Member
Platinum Member
Thread Starter
Re: heads for 383 sbc's?
I don't have any pics yet. She is currently stripped down to the hull. A work in progress, which I hope to have in the water by July(if the ice is gone!). It is a 1978 Formula 233Interceptor. Twin small blocks was an option. I believe it is the same hull design Don Aronow raced in the 60's. It's not fast by design but handles the rough stuff as well as most 28'-30' boats. And its a bit tubby weighing in at 5500lbs dry.
#16
Platinum Member
Platinum Member
Thread Starter
Re: heads for 383 sbc's?
Thanks for the info, I'm a novice in the technical side of power boating, and all the info you guys share is a great help. I'm also an information junkie!