Compression change
#1
Registered
Thread Starter
Compression change
When changing compression from 8.75 to 9.5 of 9.75 what should a person see in the difference of HP? Base motor is 500EFI. Is there a rule of thumb as to how much HP gain per .25 increments?
#2
Registered
Re: Compression change
I just did that too my motors over the winter and took them to 9.75 comp. , everyone said I should have with the other mods done, cam, porting, carb.....should be around 580-590hp.
#3
Platinum Member
Platinum Member
Re: Compression change
usually a longer duration cam accompanies a hike in compression ratio.
Some combinations could actually lose power with a hike, if you were running close tooptimal cylinder pressures already.
Some combinations could actually lose power with a hike, if you were running close tooptimal cylinder pressures already.
#4
VIP Member
VIP Member
Re: Compression change
Hot Rodding did a article awhile back that started at 8to1 up to 12to1 averaged about 4-5%increse per increase. Of couse
cam, heads and other factions will come in to play.
cam, heads and other factions will come in to play.