hpy540

Hey dose ne1 have a gear selector cam lying around off of a bravo that is blown? Mine did-not come with one and they are not available right now. Backorder. the number and they are all the same for a bravo a xr and a xz. the number is 808790. it Is a cam that goes on the shifter fork assembly.

Mbam

That is not a good PN

ali

If you mean this 806790... Both upper and lower YUP I got em!! Iwas just about to put them on ebay. I cant post a pick, but if you send me your email I can send some pics.

ali

Or better yet, send me your address and I'll send them out today. The part number for these is 806552A1 about a 100.00 plus shipping. If you like mine you can have them for 25.00 including shipping.(ground) or If your in a hurrry 30.00 for three day shipping. If ya dont like them send them back!!!!Your only out shipping one way.

hpy540

My email, and please include your phone number [email protected]

ali

You have mail!!!!

hpy540

yes the pn is from the pic that is associated with the 06552a1 on your website. I will probably Need a o ring kit as well. I dumped fuel put the lower on today and put batteries in it. it popped one and burned all the hair off my arm. i bumped the dist and it popped three times and i decided to cal lit quits cuz the upper gearcase dose not have any lube. I then noticed a small stream of fluid running out of the lower hole for the water pickup. The gearcase did not leak before i put it on. Dose NE1 have a idea what this is? Remember i bought the boat and drive as a box of parts. The drive was in one piece i just welded a skeg on it. It did not leak. So, i have never had it on the water.