|
Originally posted by sharkeymarine Like the one's I glassed on Haulin' Glass?:eureka: |
1 Attachment(s)
I had ended up building them new extended hatches that were close to 10 feet long. This covered the area behind the bolsters.
|
1 Attachment(s)
They ended up weighing far less then the existing shorter ones...:D
|
VinMan, Are you not getting enough positive airflow in there now?:confused:
|
Folks: Be carefull with those scoops. They might cost you more in aerodynamic drag than what they (hopefully) gain in induced air pressure. At top speed, aerodynamic drag can become very significant.
|
I'd add NACA ducts on the hatches and run a PVC tube to blow air directly on the ingition boxes. Also Smitty said you need to lower the voltage by using a resistor.
I'd start by calling the company that makes the boxes and asking them what to do. You looked good out there. At least it's a cheap fix. |
Originally posted by Peconic "Ah ... salvage." :D ..and thanks for all the positives guyz!!...you're right Bruce..it was worth the wait...:cool: |
1 Attachment(s)
NACA is another alternative. If you want them in fiberglass, let me know. I believe I have a set of molds for those. Single or double ducts. Otherwise you'll get them in plastic and rivet them in.
|
Tim...I sent you a pm...
|
Someone pls educate me on those NACA ducts.
|
| All times are GMT -5. The time now is 04:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.