The boat ran great over 90 mph. the boat has seen two seen two runs on gps at 128.

HTM sold another 2 boats this week, we need more open bow sr if anyone wants to sell lets know, HTM
www.htm2performanceboats.com
Cale Carder

If you can afford a new boat think about updated you HTM with a new hull, we can take everything off your old boat and make it brand new

So u did not like drive?

HTM and Carder Performance and Marine Regatta
 

HTM and Carder Performance will have their Regatta Septn 30- Oct 2nd call HTM @ 928-855-8155 of check out our websites to find out the details.
Rhonda

HTM needs to bring a boat or 2 to the emerald coast poker run this year.. AUG 9-12... I'm the lonely HTM representing at these events...:lolhit:

we there every year with a sr 24

didnt see it last year...

X-dimensions
 

Just bought a new hull- totally empty.
Some input on the power:
Donovan 11.1 block- 600inches- 4.5x4.630- 7.5 oliver rods.
Crower crank- Olds mains, Olds center thrust, Chevy seals and rods.
357CNC heads
Solid roller. PSI Blower on a custom manifold running 15-18psi. Mechanical andEFI injection. 24EFI injectors and 2 mechanicals. Custom IAC running below the blower. PSI hat.

Interested to hear more about the Arneson- who's trans? Downside.

Interested in X dimension and boats response to set backs. Not so much for speed but for stability at top end.

:eekdrop: Thats a lot of motor ! Any reason your not going the #6 way ?

I have a SR24 with Bmax and 800HP now ,my plan is to convert next year to a twin turbo engine with aprox +1200 hp .
I am thinking about switching to a #6 drive .

The Bmax possibly can handle big horsepower ,but the #6 would be a good insurance

Post pics please

A.J