You go first...

I was able to mount my cup holders in the web behind the front bolster to the gunnel works great
Steve

Where?

I will get pictures

Hey Strip,
what kind of wood did you use for your center cushion?Hustler said they use Starboard.

Two free cupholders in your choice of colors for drilling the holes to whoever goes first in the side arm rest of a Cheetah or Slingshot!!

scrap plywood, I finished it pretty good ,painted it,I got the foam from hustler, to get the right density and thickness, I cut the corner with a turkey cutter ,got the material from Mcloed,Had a local guy make the cover with zipper.

If i had to do it again i would make it longer on the sink side, cut at a angle

star board would be better

gonna do mine this weekend, not sure of i can get any starboard locally

I was checking my drives and tabs wed,making sure the indicators were right on. I found that the drives were toed 13/16.I wonder if it was hurting me that bad? When I got the new HT drives. the caps must of been drilled diff. I should of ck-ed it.I got it down to 3/8 bottomed out on the adjustment,Now I have to cut the tie bar to get anymore.

picked up a little,w/ 3/4 fuel 102.4 mph

Whats your proceedure for checking alignment?

Dont some boats require a little toe in?

Thanks