Up Date Your 388 Hustler
#201
Registered
Join Date: Aug 2007
Location: Destin, Fl
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
ABERG,
I am in the process of redoing my cockpit interior as well as the gauges. I pulled the cockpit interior, sunpad, dash pad and gauges out last weekend. My dash panel was a PIA and needed 2 people to get all the screws off, then another 45 minutes of prying the dash panel from the dash. It was caulked at least it wasn't 5200, but it took alot care not to damage or gouge the face panel. We actually used a paint stirrer with the end ground down to a knife edge to wedge between the dash and panel. I plan on starting a thread on my progress with pix, but I don't have the time this week. If you need dash pictures send me your email address and I can send you some close up detailed pictures.
I currently have gaffrig gauages and they are getting refaced at Livorsi as we speak. Contact, Kirk at Elite Marine, [email protected] He's taking care of my gauges
Rich
[email protected]
I am in the process of redoing my cockpit interior as well as the gauges. I pulled the cockpit interior, sunpad, dash pad and gauges out last weekend. My dash panel was a PIA and needed 2 people to get all the screws off, then another 45 minutes of prying the dash panel from the dash. It was caulked at least it wasn't 5200, but it took alot care not to damage or gouge the face panel. We actually used a paint stirrer with the end ground down to a knife edge to wedge between the dash and panel. I plan on starting a thread on my progress with pix, but I don't have the time this week. If you need dash pictures send me your email address and I can send you some close up detailed pictures.
I currently have gaffrig gauages and they are getting refaced at Livorsi as we speak. Contact, Kirk at Elite Marine, [email protected] He's taking care of my gauges
Rich
[email protected]
#202
Registered
Join Date: Nov 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
ABERG,
I am in the process of redoing my cockpit interior as well as the gauges. I pulled the cockpit interior, sunpad, dash pad and gauges out last weekend. My dash panel was a PIA and needed 2 people to get all the screws off, then another 45 minutes of prying the dash panel from the dash. It was caulked at least it wasn't 5200, but it took alot care not to damage or gouge the face panel. We actually used a paint stirrer with the end ground down to a knife edge to wedge between the dash and panel. I plan on starting a thread on my progress with pix, but I don't have the time this week. If you need dash pictures send me your email address and I can send you some close up detailed pictures.
I currently have gaffrig gauages and they are getting refaced at Livorsi as we speak. Contact, Kirk at Elite Marine, [email protected] He's taking care of my gauges
Rich
[email protected]
I am in the process of redoing my cockpit interior as well as the gauges. I pulled the cockpit interior, sunpad, dash pad and gauges out last weekend. My dash panel was a PIA and needed 2 people to get all the screws off, then another 45 minutes of prying the dash panel from the dash. It was caulked at least it wasn't 5200, but it took alot care not to damage or gouge the face panel. We actually used a paint stirrer with the end ground down to a knife edge to wedge between the dash and panel. I plan on starting a thread on my progress with pix, but I don't have the time this week. If you need dash pictures send me your email address and I can send you some close up detailed pictures.
I currently have gaffrig gauages and they are getting refaced at Livorsi as we speak. Contact, Kirk at Elite Marine, [email protected] He's taking care of my gauges
Rich
[email protected]
Thanks Rich.
my e-mail is [email protected]
Anyone that have closeup pictures on dashes in Slingshots can mail me.
Where is the hourmeters in slingshots with Livorsi meters from 2002-03 and forward, its not on the dash????
#203
Registered
Join Date: Aug 2007
Location: Destin, Fl
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
ABERG,
I tried emailing you a few times and it keeps getting backed to me. Shoot me an email at [email protected] so I have a good email address for you.
Rich
I tried emailing you a few times and it keeps getting backed to me. Shoot me an email at [email protected] so I have a good email address for you.
Rich
#204
Registered
Join Date: Nov 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
ABERG,
I tried emailing you a few times and it keeps getting backed to me. Shoot me an email at [email protected] so I have a good email address for you.
Rich
I tried emailing you a few times and it keeps getting backed to me. Shoot me an email at [email protected] so I have a good email address for you.
Rich
This is my mail.
[email protected]
Anyone that have closeup pictures on dashes in Slingshots can mail me at this adress
Where is the hourmeters in slingshots with Livorsi meters from 2002-03 and forward, its not on the dash????
#206
Registered
Join Date: Nov 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#207
Registered
Join Date: Nov 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Where is the hourmeters in slingshots with Livorsi meters from 2002-03 and forward, its not on the dash????
Before i take the saw and take out the holes, please tell me where the hourmeters are located on newer Slingshots???
Before i take the saw and take out the holes, please tell me where the hourmeters are located on newer Slingshots???
#209
Registered
Join Date: Nov 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Yes and there i have them on my to.
Have a GPS so i dont have the space for Hours on the dash any longer.
Four more meters going in to the dash..
Nice steeringwheel Strip Poker
Have a GPS so i dont have the space for Hours on the dash any longer.
Four more meters going in to the dash..
Nice steeringwheel Strip Poker
Last edited by aberg; 03-31-2010 at 03:17 PM.