heres more of the windshield and some of the sliding doors i made

24 degrees......Just in case the private message did not work heres the pic of the joiner for the windshield.......9-1/2in on front 1-1/4in wide and 71n on the cockpit side, i have the old windshield but it is cracked....

I Need Help With The Name For Her Also Suggestiones

Hi nocigarette,

Do you have anymore pic's of the engine compartment...and what size are those fuel tanks? Are you going to drop the floor 8" like others have done...and are the original fuel tanks still under the cuddy floor? I'm going to drop a single in my 74 Sport and would appreciate any helpfull advice.

Thanks, Tony

I Can Take All The Pics Ya Need Yes The Floor Is Dropped And The Tanks Are In The Engine Compartment. Tell Me What Ya Want Im Home Today And Working On Her

They Only Allow 3 Per Post Due These Help Ya

More More

More

WOWWWWWW!!!!!

The pictures are fantastic....and the cuddy is almost like a new 27' Fastech. That's almost exactly what I want to do to mine. Did you do the cuddy...and is there a place for a head, cause I'm planning on it, with a pumpout. I'm also putting in a sink and fridge and maybee even A/C for overnighters.

Can the floor be dropped for the passengers in back of my bolsters? And can you tell me what your last picture represents?

THANK'S, Tony

you can drop the floor as far back as you want but i would leave enough room for working on the engine...The last pic is the bell housing and transmission o thought you wanted some of the engine room ...Let me know if theres anything i can help you with.