Offshoreonly.com
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Magnum Marine (https://www.offshoreonly.com/forums/magnum-marine-63/)
-   -   Teak step pad....? (https://www.offshoreonly.com/forums/magnum-marine/152985-teak-step-pad.html)

h2oboater 03-02-2010 10:33 AM
Originally Posted by 24degrees (Post 3057863)
Jeppe....I ended up finding the step pads on Ebay. I think they were off of a Chris Craft?

I think they are 12 inches long but the important thing it that they're 7 strips wide instead of the 6 strip kind that are available these days...

:)
My pads are 7 strips, 16" L x 5-3/8" W .. The pads on my Sport were the same as my Sedan.

24degrees 03-02-2010 03:19 PM
Originally Posted by h2oboater (Post 3058312)
My pads are 7 strips, 16" L x 5-3/8" W .. The pads on my Sport were the same as my Sedan.
That figures....I'm shorter than average. Oh well, it's how you use the teak step pads....not the size.

Right?

:)

h2oboater 03-02-2010 08:56 PM
1 Attachment(s)
Originally Posted by 24degrees (Post 3058566)
That figures....I'm shorter than average. Oh well, it's how you use the teak step pads....not the size.

Right?

:)
Right you are!!! Thats why a 27' Mag can run with a 35' Cig.:party-smiley-004:

Jeppe 03-03-2010 12:20 PM
Originally Posted by h2oboater (Post 3058312)
My pads are 7 strips, 16" L x 5-3/8" W .. The pads on my Sport were the same as my Sedan.
That sounds like the ones on the Maltese. What I have seen they are longer then the ones on the Sport.

I managed to get hold of Garelick who up until recently manufactured a close match to the original step pads. Garelick claims there step pad used to have 7 teak strips and 5.5" wide and 12" long. I have not yet seen a picture but there might be some laying around in Florida.

hallj 03-03-2010 12:38 PM
Originally Posted by Jeppe (Post 3058273)
I need the hinges and the latches and If you can find a TRS hatch like the one on the blue Sport I might be interested.

It turns out I need all kinds of hardware if I want to get my mag in shape. She is quite a project. Fortunately I have the rest of my life to get her fixed. :)
Jeppe, The hinges on my Magnum were casted by Chris Craft. It's on the back side.

Jeff

Jeppe 03-03-2010 02:36 PM
Originally Posted by hallj (Post 3059151)
Jeppe, The hinges on my Magnum were casted by Chris Craft. It's on the back side.

Jeff
Thanks Jeff! That means it's time to start digging in Chris Craft forums. Is it possible that the hatch latches are from Chris Craft as well?

24degrees 03-03-2010 02:54 PM
Jeppe..what boat do you own?....:)

mr vinyl 03-03-2010 02:58 PM
Hinges
 
Jeepe,you need to post what hinges your are looking for and the year of your Magnum.They have used different hinges during overall construction,and then some one should have it available. Bud

Jeppe 03-03-2010 04:19 PM
Sorry, I thought you all new which one me and my brother bought last fall.

It's an Orange '77 from lake St Claire. It's been on this forum before but unfortunately I can't post pictures right now. A hint; it spent a couple of days in Lake Erie, not on, in 2007. Thats when the hinges and the hatch disappeared.

Bud, I'll email you an old picture were the original hinges are still on.

/jeppe

Jeppe 03-03-2010 04:21 PM
Here is when we first started her up after she arrived in Sweden:
http://www.youtube.com/watch?v=X-V36xaloqI


All times are GMT -5. The time now is 09:38 PM.
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.